INFORMATION ON CE DECLARATION OF CONFORMITY

The CE Declaration of Conformity is delivered with the unit and confirms that:

“FLUORESAVE” models D 12 A, D 20 A and D 32 A

comply with all requirements contained in the clauses of:

Installation in Krakow

Directive 89/336/EEC – on Electro-Magnetic Compatibility, amended by 92/31/EEC i 93/68/EEC:

EN50081-1:1992, PN-EN 61000-6-3:2004+A11:2006
EN50082-1:1998, PN-EN 61000-6-1:2004+JS1:2006(U)
EN61000-3-2:2000, PN-EN 61000-3-2:2006(U)
EN61003-3:1995, PN-EN 61000-3-3:1997+A1:2005+A2:2006(U)+JS1:2006(U)

Directive 73/23/EEC on Low Voltage Equipment Directive, amended by 93/68/EEC:

BSEN 61010-1:2001, PN-EN 61010-1:2004

German Standards: VDE conformity with factory surveillance – (Reg. Nr A873),

Australasian standards:

AS/NZS 4051,
AS/NZS 3100,
AS/NZS 60335.

Press articles in English language may be found in i.e. Google under “fluoresave”, for instance:

www.fluoresave.com see PRESS (pdfs)
www.Krans.com
www.smartenergycentre.com see pdfs of Articles & Publications

and in Polish Language:

"Dziennik" (21.02.07)

and also

Directive WEEE/2002/96/EC - on old electric and electronic equipment and Directive 2002/95/WE - on limited use of applying some substances in electric and electronic equipment.

The FLUORESAVE models D12, D20 i D32 bear the CE mark and the number A 873 of the VDE notifying body, and fulfill all conditions required for issuing the Certificate of Confomity of Chief Electric Inspector, State Victoria, Australia, and Certificate HSB Global Standards, Beijing, confirming that Beijing Vantone Electric Co., Ltd., fulfills the conditions for management of the quality system GB/T19001-2000 idt ISO9001:2000 for product „Fluorescent Lamp Computer Energy Saver”.
The Instruction Manual contains all information needed for correct installation and exploitation.

REFERENCES

The protocol of test carried out by the Polytechnic of Kraków, Faculty of Electrical and Computer Engineering, Institute of Electromechanical Transformation of Energy confirming that Fluoresave model D 12 A conforms to the technical documentation delivered with the unit and during the test saved approximately 31.3% of power consumption when 8 x L18W (Lumilux de Luxe of OSRAM) with inductive ballast were connected to the circuit and circa 22.8% when HQJ-E-250D (OSRAM) metal halide tubes were connected (with inductive ballast and starter) to the circuit.